您的瀏覽器版本已過時。我們建議您更新瀏覽器到最新版本。
NFC Module

KingpeX Technology provide new NFC module products into the market and support OEM/ODM business.

瑞達科技新推出 NTAG I2C NFC module運用NFC技術,附有RF及I2C介面,其中的Pass-Through模式允許快速上傳及下載資料,能安全快速的傳輸符合 NDEF格式的資訊:包括文字訊息、網址、圖片、經緯度(地理定位)等。

NTAG I2C NFC module能讓智慧型手機之間更便於分享各類資訊,像是代替紙本名片交換聯絡資訊。除此之外,能連結後端微控制器,互相傳遞訊息與指令。應用於智慧家電上能讓使用者獲得家電運作如冰箱溫度等資訊,或是使用手機直接操控家電運作。

NFC 技術在生活中有許多不同運用:像是用於展覽會場或廣告機上,以手機感應NTAG標籤即可使顧客或潛在消費者獲得相關訊息;或是用於身分驗證代替傳統鑰匙; 以及電子商務上取代卡片付款,出門消費不再需要攜帶多張卡片。
 
除上述應用外,NFC仍有許多運用的可能性尚待一同探索發掘!
 
歡迎聯絡洽詢!


1. Our NFC module is based on NXP Semiconductors NTAG203F (NFC Forum Type 2 Tag compliant IC).

2. The communication layer (RF Interface) complies to parts 2 and 3 of the ISO/IEC 14443A standard.

 
3. The NTAG203F module is primarily designed for connection handover, Bluetooth simple pairing, Wi-Fi protected set-up, device authentication, gaming and others.

4. The module is with an antenna on board. When the NTAG is positioned in the RF field, the high speed RF communication interface allows the transmission of the data with a baud rate of 106 kbit/s.

NFC Module - KingpexNFC Module - Kingpex


NFC major operation modes

Card Emulation Mode

Main Function: Making contactless transactions

Main Application: Mobile payment, ticketing, access control, transit, top-ups, and toll-gate

Specification:

1.      ISO/IEC 14443(A&B),MIFARE and Type B'card emulation support via SWP up to 424 kbit/s

2.      ISO/IEC 14443A,MIFARE and FeliCa over NFC-WI

Peer-to-Peer Communication Mode

Main Function: Connectivity

Main Application: Data transfer; Fast, easy and convenient device association, setup and configuration

Specification:

1.      NFCIP-1 compliance

 

Reader/Writer Mode

Main Function: Access information on the move

Main Application: Content distribution, Information access, Smart advertising

Specification:

1.      ISO/IEC 14443 Type A & B R/W up to 848 kbit/s

2.      ISO/IEC 15693

3.      FeliCa R/W support up to 424 kbit/s

4.      Support for all mandatory NFC Forum tags

5.      R/W support for MIFARE 1K,4K


NXP Available NFC SoC
 : PN544 C3PN650

 

PN544 C3 - NFC Controller   

Features

1.      80C51MX core

2.      Integrated power management unit

3.      Hard power down current less than 5uA at 3V power supply

4.      Direct connection to mobile battery 2.3 to 5.5V

5.      Powered-by-the-field in card emulation

6.      Powered-down mode in card emulation

7.      Secure element supply (SIM,SMX)

8.      Integrated FracNpll to save XTAL quartz

9.      Integrated self test to test antenna matching circuit during production

10.    Package TFBGA64(4.5*4.5)

11.    PN544/C3 reference design 1.1 is certified by NFC Forum Certification Program

Interfaces

1.      Host baseband: SPI,I2C,Serial UART

2.      Secure elements: SWP,NFC-WI


PN650 - NFC Secure Module 

Features

1.     Stacked ICs solution including:

        l   PN544/C2

        l   SmartMX internally connected to PN544 via S2C

2.     Small footprint single package (TFB/GA64:4,5x4,5) solution for size optimization

3.     Pin-to-pin compatible with PN544 NFC controller chip: same functions assigned to the same pins, possible to insert into the same PCB socket

4.     JCOP2.4.2 or third party operating system

Interfaces

1.     Host baseband: SPI, I2C, Serial UART

2.     Secure elements: SWP, NFC-WI (internal)